Corrosion Bath CB10

CB10
ASTM / NACE Corrosion Bath
ASTM D665, D4378, NACE TM0172,
IP 135, ISO 7120, GOST 19199, JIS K2510

The CB10 revolutionizes corrosion testing by bringing unmatched automation and precision to the analysis of corrosion properties of mineral oils and pipeline cargoes.
The test preparation is simplified and the test can be run unattended simultaneously or independently on the two positions. Test timing, water injection volume, temperature and specimen insertion are precisely controlled.
Directly compatible with both ASTM & NACE test methods, the CB10 strictly follows the selected test method (ASTM D665, NACE TM0172, ASTM D7577, GOST 19199, JIS K2510, …).
The corrosion rating can be done visually (pass/fail) or much more precise and not subjective by automated corrosion rater CT10.

APPLICATIONS
Refineries
Mineral and steam turbine oils
Pipeline and terminals
Iron Corrosion Testing

METHODS
ASTM D665 (A, B, C)
ASTM D4378, D7155, D7577
NACE TM0172
IP 135, IP PM DB
ISO 7120
GOST 19199
JIS K2510

Easy
The CB10 is a straightforward, fully automated instrument. The test preparation is simplified and the test can be run unattended, independently, on the 2 positions.

Wide range of applications
The CB10 is directly compatible with the following types of sample: lubricating oils, pipeline cargoes and glycol.

Increased precision
Both PT100s come with embedded calibration data. The instrument precisely controls all the test conditions: temperature, stirring speed, time, water volume injection.

Reduced labor and operation time
The test preparation is simplified, and the test is run automatically and independently on the two positions.

Increased safety
The CB10 totally eliminates all safety risks. If anything hangs to the stirrer shaft, the stirring will be stopped to prevent injuries.

Very compact design
The 2-position standalone automated CB10 instrument does not need much bench space: the width is only 44 cm.