Dropping Point Of Lubricating Grease - LT/DP-211503/DC

ASTM D566 - IP 132 - DIN 51801 - Dropping Point of Lubricating Grease.
This test method covers the determination of the dropping point of lubricating grease. This test method is not recommended for use at bath temperatures above 288°C.

ASTM D2265 - Dropping Point of Lubricating Grease over Wide Temperature Range
This test method covers the determination of the dropping point of lubricating grease.

ASTM D4950 - Classification and Specification of Automotive Service Greases.
This specification covers lubricating greases suitable for the periodic relubrication of chassis systems.

LT/DP-211506/DC

Features - Digital Manual Apparatus for Dropping Point of Lubricating Grease, ASTM D2265 – D4950
1. Metal structure painted with anti-epoxy varnish with frontal stainless-steel opening for easily check the 6 test positions.
2. Insulated 6 places aluminium furnace block for heat up to +400°C.
3. 6 vertical apertures for the introduction of the sample tubes with spherical end for easily cleaning.
4. Viewing chambers illuminated by a cold light lamp.
5. Touch screen 7” easy to read with operation system, alarm for over temperature.
6. Lablink software:
7. Diagnostic and calibration menu.
8. Real time temperature display for each channel.
9. 6 × PT100 sensors Class A, for real time sample temperature with 0.1°C resolution and 0.5°C precision.

Power supply
220 or 115 Vac 50/60 Hz

Power consumption
1000 Watt

Temperature Range
Ambient to +400°C